VW New Beetle Convertible Airbag code G283

LudwigVan
Posts: 51
Joined: Thu Oct 08, 2015 8:26 pm

VW New Beetle Convertible Airbag code G283

Post by LudwigVan »

I am reading an error code 01738 pointing to a bad connection/faulty front airbag crash sensor on my car.

I cleared it, but it comes back in a few days. I will check the connector and also if it is covered under a recall.
Attachments
Recall info - Im covered!!
Recall info - Im covered!!
Screen Shot 2015-10-15 at 9.50.14 AM.png (128.41 KiB) Viewed 10343 times
Front crash sensor G283 location
Front crash sensor G283 location
Screen Shot 2015-10-15 at 9.48.50 AM.png (168.52 KiB) Viewed 10344 times
jimmy57
Posts: 5
Joined: Thu Jan 21, 2016 8:02 pm

Re: VW New Beetle Convertible Airbag code G283

Post by jimmy57 »

Get access to the connector and then unplug and spray a contact cleaner/protector on it (or WD-40) and plug it in and unplug 3 times. Then spray it again and plug it back together and clear code. Of course, look into connector and use a mirror to view the sensor connector and make sure there is no damage or obvious corrosion build up first.
LudwigVan
Posts: 51
Joined: Thu Oct 08, 2015 8:26 pm

Re: VW New Beetle Convertible Airbag code G283

Post by LudwigVan »

Access to that connector is a female dog. Its still intermittent so I will chase it in the spring. Code is consistent.

Reading and Clearing with my AUTEL 801 scanner
LudwigVan
Posts: 51
Joined: Thu Oct 08, 2015 8:26 pm

Re: VW New Beetle Convertible Airbag code G283

Post by LudwigVan »

Reviewing records - I had my airbase sensors inspected on recall in 2012 - now they have failed. I wonder if I can go back and claim warranty on these now? Will advise.
Post Reply Previous topicNext topic