Page 1 of 1
					
				2003 4motion cel
				Posted: Fri Jan 29, 2016 8:02 pm
				by saintmoody
				Yay I got some new codes for this week to ponder... p0441, p0300 thoughts and experience would be awesome, thanks!
			 
			
					
				Re: 2003 4motion cel
				Posted: Mon Feb 01, 2016 2:30 pm
				by gfmatthe
				Ross-Tech site:
 
16825/P0441/001089 - EVAP Emission Control Sys: Incorrect Flow
Possible Symptoms
    Malfunction Indicator Light (MIL) active 
Possible Causes
    Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) faulty/jammed
    Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115) faulty/jammed
    Evaporative Emission (EVAP) Canister Sealing faulty
    Pipes between Tank Breathing and Throttle Body leaky/blocked 
Possible Solutions
    Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
        Perform Output Test 
    Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115)
    Check Evaporative Emission (EVAP) Canister
        Perform Basic Setting 
    Check Pipes between Tank Breathing and Throttle Body 
Special Notes
    When found in the NAR 1.8T Audi A4 1.8T check TSB 24-08-78 or 2010268/3 or Pass-Thru equivalent TSB
    When found in the NAR 1.8T VW Passat 1.8T check TSB 01-09-09 or 2005554 or Pass-Thru equivalent TSB
        Note: The Passat 26E5 or "R5" recall includes the same software update 
    Make sure the quick release lines for the N80 valve and vacuum line to LDP are not crossed.
        This can also make the engine hard to start after filling up the fuel tank. 
16684 P0300
	
Random/Multiple Cylinder Misfire Detected
Good luck.
Gary.
			 
			
					
				Re: 2003 4motion cel
				Posted: Thu Feb 04, 2016 12:22 pm
				by saintmoody
				thanks for the definitions... more looking for others with same code combo and fixes that worked. Now the car will not start so I gotta go deeper.